Cementing-Equipment

SPH14 7 Foam Slurry Mixing Skid

Sph14 7 Foam Slurry Mixing Skid is a skid-mounted mobile cementing spread for slurry mixing and placement. The shortlist starts with pressure and displacement control and the control package.

SPH14-7 Foam Slurry Mixing Skid, 7MPa, nitrogen foam cementing
Product description

SPH14-7 Foam Slurry Mixing Skid

Foam slurry mixing skid, low-density foam cement slurry, for low-pressure lost-circulation formations. This heavy-duty cementing unit (high-pressure working capacity) is designed for professional oilfield service companies who need reliable, field-proven cementing equipment that performs consistently under continuous well cementing duty.

SJ Petroleum Machinery manufactures this high-pressure cementing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.

Technical Highlights

Key features

Power End

The diesel engine and drivetrain are rated for continuous cementing pump duty. Critical components (Cummins engine, Siemens control system) are sourced from reputable manufacturers with global service support.

Fluid End

Foam ratio: 14:7

Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.

Control

Operator cabin with data logging

Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.

Mobility

Road-legal, single-unit transport

The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.

Build Quality

Factory-tested before shipment

Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.

Service Support

Global spare parts network

We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.

Applications

Where this unit fits

This foam slurry mixing skid is specifically designed for:

  • Low-pressure lost-circulation formations: Foam cement reduces hydrostatic pressure to prevent lost circulation
  • Long cement columns: Lightweight foam slurry for annular columns where conventional cement would fracture formations
  • Shallow well low-density cement: Precise foam generation for controlled density in shallow and weak formations
  • Thermal insulation applications: Foam cement provides annular heat insulation for production wells
How It Works

Operating sequence

The cementing operation follows these key steps:

  1. Site positioning: Truck or skid unit positioned at wellhead, suction and discharge lines connected
  2. Pre-job checks: Operator verifies fluid end condition, safety valves, and control system calibration
  3. Mix preparation: Mixing system prepares cement slurry to target density and specifications
  4. Pumping stage: Pump delivers slurry at controlled rate and pressure, operator monitors real-time data
  5. Displacement: After cement slurry, displacement fluid pushes cement to target depth
Selection Guide

Do you actually need a foam cement mixing unit, or is standard cement enough?

Foam cement (also called foamed cement) is lightweight cement slurry with nitrogen gas injected into it. It has lower density (typically 0.8–1.4 g/cm³ vs 1.8–2.0 g/cm³ for normal cement), which reduces hydrostatic pressure on weak formations. The SPH14-7 is a dedicated foam cement mixing skid — it is not a standard batch mixer. If you do not need foam cement, you should not buy this unit.

Choose a foam cement mixing unit when:

  • You have weak or depleted formations that cannot handle normal cement density. Normal cement at 1.8 g/cm³ can fracture or lost-circulation zones, leading to lost returns during cementing. Foam cement at 1.0–1.4 g/cm³ has lower hydrostatic pressure, so it can be placed without breaking down weak formations. This is the #1 reason operators spec foam cement.
  • You need lightweight cement for thermal insulation. Geothermal wells, steam injection wells, or deepwater wells where the cement sheath needs to insulate against temperature or pressure changes. Foam cement has better thermal insulation properties than normal cement because the gas bubbles trap heat.
  • You are doing lightweight cement for shallow or high-angle wells. In shallow onshore wells or extended-reach wells, equivalent circulating density (ECD) can break down the formation. Foam cement reduces ECD and allows cement placement in wells where normal slurry would be lost.
  • You have a nitrogen supply. Foam cement requires continuous nitrogen injection (usually from a nitrogen pumping unit). The SPH14-7 mixes and conditions the foam slurry, but it needs a separate nitrogen source. If you do not have nitrogen units in your fleet, you need to rent or buy those too — factor this into the total cost.

Foam cement vs normal cement — when is foam overkill?

  • Normal cement is fine for: Strong formations, normal well depths, and standard primary cementing where lost circulation is not a problem. Buying a foam cement unit for jobs that do not need it is a waste of capital.
  • Foam cement is required for: Weak/depleted formations, lost circulation zones, geothermal wells, and any operation where hydrostatic pressure must be minimized. If your well program includes these conditions, the foam unit pays for itself in avoided lost-circulation events and cement failures.
Configuration Options

Common selections

  • Gas compressor: customized configuration tailored to your field conditions
  • automatic foam control system.: customized configuration tailored to your field conditions
  • Automated control system: PLC-based control with touchscreen HMI
  • Data acquisition and recording: real-time monitoring and data logging
FAQ

Buyer questions

Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.

Q: Do you supply the complete cementing spread for oil well cementing?
A: Yes. We can supply complete cementing spreads for oil well cementing operations: cementing trucks, batch mixers, cement tanks, and additive systems as a package, engineered to work together for onshore and offshore oilfield projects.

Q: Can you customize cementing units for deep well and high-pressure operations?
A: Yes. We customize cementing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need desert, cold-weather, or offshore configurations, send your site conditions and we will return a tailored cementing truck configuration.

Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.

Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.

Why SJ Petro

Manufacturing background

SJ Petroleum Machinery has been manufacturing cementing equipment since the 1980s, with over 500 cementing units delivered to oilfield operators in the Middle East, Central Asia, Africa, and Southeast Asia. Our cementing trucks and skids are API-certified and customized for well depths ranging from shallow to ultra-deep wells. We provide factory-direct pricing, global after-sales support, and on-site commissioning for your cementing operations.

Get a Quote

Ready to discuss this model?

Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.

Product Parameters

Parameter table

ModelMixing capacity bbl(m³)Working pressure MPa(psi)Foam quality range %Nitrogen injectionDrive / form
SPH14-7 Foam mixing skid14 (2.2)7(1,000)60–75Integrated NN&sub2;?generation / boost packageDiesel-electric, skid-mounted
Related products

More from Cementing-Equipment

Cement Tank And Bulk System
Cement-tank-and-bulk-system

Cement-tank-and-bulk-system

Cement Tank And Bulk System suits buyers who need slurry mixing and placement in a field-deployable format. Its fit depends on pressure and displacement control and the project duty cycle.

View details
Continuous Liquid Additive System
Continuous-liquid-additive-system

Continuous-liquid-additive-system

Continuous Liquid Additive System combines cementing package duties with a field-deployable layout. Buyers usually check pressure and displacement control, continuous-load control, and field operation.

View details
SGJ1000 21 Single Pump Cementing Truck
SGJ1000-21-Single-pump-cementing-truck

SGJ1000-21-Single-pump-cementing-truck

Sgj1000 21 Single Pump Cementing Truck is a truck-mounted mobile cementing spread for slurry mixing and placement. The shortlist starts with pressure and displacement control and the control package.

View details
SGJ1600 28 Single Pump Cementing Truck
SGJ1600-28-Single-pump-cementing-truck

SGJ1600-28-Single-pump-cementing-truck

Sgj1600 28 Single Pump Cementing Truck suits buyers who need slurry mixing and placement in a truck-mounted format. Its fit depends on pressure and displacement control and the project duty cycle.

View details
SGJ2500 38 High Power Cementing Truck
SGJ2500-38-High-power-cementing-truck

SGJ2500-38-High-power-cementing-truck

Sgj2500 38 High Power Cementing Truck is a truck-mounted mobile cementing spread for slurry mixing and placement. The shortlist starts with pressure and displacement control and the control package.

View details
SGJ350 25 Twin Pump Cementing Truck
SGJ350-25-Twin-pump-cementing-truck

SGJ350-25-Twin-pump-cementing-truck

Sgj350 25 Twin Pump Cementing Truck combines mobile cementing spread duties with a truck-mounted layout. Buyers usually check pressure and displacement control, field-side control, and field operation.

View details