ZJ90D Ultra-Deep Drilling Rig at Tashen Well
This is a project reference: a ZJ90D AC VFD ultra-deep drilling rig operating at the Tashen gas field, one of China's deepest onshore drilling projects. The rig is rated for 6750 kN hook load and 9000 m nominal drilling depth, engineered for HPHT (high-pressure, high-temperature) deep gas wells.
The Tashen project targets gas reservoirs at 7000–9000 m with bottom-hole temperatures exceeding 180C and pressures above 100 MPa. This environment pushed the rig, mud system and BOP stack to their limits. The ZJ90D was selected for its 6750 kN hook load, double-lifting substructure with 9 m cellar clearance, and 1257 mm rotary table for HPHT BOP installation.
Selection Guide
Is a ZJ90D HPHT rig the right answer for your ultra-deep well program?
This is the top of the SJ Petro drilling rig range: a ZJ90D AC VFD rig (6,750 kN hook load, 9,000 m rating) proven on the Tashen gas field — China's deepest onshore wells, with 180°C bottom-hole temperature, 100+ MPa formation pressure, and sour gas. It is an HPHT package, not a standard deep rig. If your program does not face these conditions, this rig is over-specified.
Choose this HPHT rig when:
- Target depth is 8,000–9,000 m. Below 8,000 m, a ZJ70 or ZJ80 rig is more economical. This rig exists for the ultra-deep class where 6,750 kN hook load and the 45 m K-type mast (rated for 140 mm drill pipe) are required.
- Bottom-hole temperature exceeds 150°C. At 180°C, standard rig electronics, elastomers, and mud systems fail. This package includes HPHT-rated components and a high-density (2.0+ SG) oil-based mud system with degasser and centrifuge for mud maintenance at extreme conditions.
- Formation pressure exceeds 100 MPa. The 13-5/8" 105 MPa BOP stack (with annular, double ram, and shear rams, NACE MR0175 sour-rated) is sized for this pressure class. If your well pressure is below 70 MPa, a standard 70 MPa BOP is sufficient and much cheaper.
- You face sour gas (H2S). Sour service requires NACE MR0175-rated equipment throughout — BOPs, wellhead, flowlines. The package is built for it. If your wells are sweet (no H2S), you pay a sour-service premium for nothing.
ZJ90D HPHT vs a standard ZJ80D — when is the 90 class justified?
- Standard ZJ80D: 5,850 kN hook load, 8,000 m rating, standard BOP. Choose for deep wells without extreme temperature/pressure/sour conditions. Lower cost, faster delivery.
- ZJ90D HPHT (this rig): 6,750 kN, 9,000 m, 105 MPa BOP, HPHT mud system, sour service. Choose when the well environment demands it — the extra cost is small insurance against a failed HPHT well, which costs far more than the rig.
HPHT specifications
Is a ZJ90D HPHT rig the right answer for your ultra-deep well program?
This is the top of the SJ Petro drilling rig range: a ZJ90D AC VFD rig (6,750 kN hook load, 9,000 m rating) proven on the Tashen gas field — China's deepest onshore wells, with 180°C bottom-hole temperature, 100+ MPa formation pressure, and sour gas. It is an HPHT package, not a standard deep rig. If your program does not face these conditions, this rig is over-specified.
Choose this HPHT rig when:
- Target depth is 8,000–9,000 m. Below 8,000 m, a ZJ70 or ZJ80 rig is more economical. This rig exists for the ultra-deep class where 6,750 kN hook load and the 45 m K-type mast (rated for 140 mm drill pipe) are required.
- Bottom-hole temperature exceeds 150°C. At 180°C, standard rig electronics, elastomers, and mud systems fail. This package includes HPHT-rated components and a high-density (2.0+ SG) oil-based mud system with degasser and centrifuge for mud maintenance at extreme conditions.
- Formation pressure exceeds 100 MPa. The 13-5/8" 105 MPa BOP stack (with annular, double ram, and shear rams, NACE MR0175 sour-rated) is sized for this pressure class. If your well pressure is below 70 MPa, a standard 70 MPa BOP is sufficient and much cheaper.
- You face sour gas (H2S). Sour service requires NACE MR0175-rated equipment throughout — BOPs, wellhead, flowlines. The package is built for it. If your wells are sweet (no H2S), you pay a sour-service premium for nothing.
ZJ90D HPHT vs a standard ZJ80D — when is the 90 class justified?
- Standard ZJ80D: 5,850 kN hook load, 8,000 m rating, standard BOP. Choose for deep wells without extreme temperature/pressure/sour conditions. Lower cost, faster delivery.
- ZJ90D HPHT (this rig): 6,750 kN, 9,000 m, 105 MPa BOP, HPHT mud system, sour service. Choose when the well environment demands it — the extra cost is small insurance against a failed HPHT well, which costs far more than the rig.
ZJ90D, 6750 kN hook load
ZJ90D AC VFD rig, 6750 kN hook load, 9000 m depth. Double-lifting box substructure (9 m cellar), 1257 mm rotary table, two F-1600 mud pumps, 500 t top drive.
HPHT, 180C bottom-hole
Tashen gas field: target depth 8000–9000 m, bottom-hole temperature >180C, formation pressure >100 MPa. Sour gas with H2S content.
105MPa 13-5/8" BOP
The 9 m cellar clearance accommodates a 13-5/8" 105MPa BOP stack with annular, double ram and shear rams. The BOP is rated for sour service (NACE MR0175).
High-density mud, 2.0+ SG
Two F-1600 pumps circulate high-density (2.0+ SG) oil-based mud. The solids control system is upgraded with degasser and centrifuge for HPHT mud maintenance.
45 m K-type mast
The mast is a 45 m K-type structure, height-rated for 9000 m drilling with 140 mm drill pipe. The mast is load-tested to 1.5 times working load.
Deepest onshore wells in China
The rig has successfully drilled multiple wells beyond 8000 m at Tashen, demonstrating the capability of Chinese-built ultra-deep rigs in HPHT sour gas conditions.
Buyer questions
Q: Can the ZJ90D handle other HPHT projects?
A: Yes. The 6750 kN hook load and 9 m cellar are designed for HPHT wells up to 9000 m. We have supplied similar rigs to deep-gas projects in China and are open to international HPHT tenders.
Q: What is the lead time for a ZJ90D?
A: 12–14 months for a new rig, given the specialized substructure, BOP integration and HPHT mud system.
Q: Can you supply the BOP and mud system as a package?
A: Yes. We can supply the complete drilling package: rig, substructure, BOP stack, mud system and solids control, all engineered to work together.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Need an ultra-deep rig?
Tell us your target depth, bottom-hole pressure and temperature, and well profile. We will return a ZJ90D HPHT package and pricing within 48 hours.