Desert Workover Rig
Desert workover rig, 55C cooling, sand filter air intake, dust-sealed electrical. Designed for professional oilfield service companies and operators who need reliable, field-proven workover equipment that performs consistently under continuous duty.
SJ Petroleum Machinery manufactures this high-pressure workover rig to API standards, with full factory testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Power: Desert-rated diesel
The diesel engine and drivetrain are rated for continuous workover rig duty. Critical components (Cummins engine, control system) are sourced from reputable manufacturers with global service support.
Hook load: 450-750 kN
Hoisting system is designed for heavy-duty workover service with modular components. Field maintenance is straightforward; a trained crew can service the unit in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for hook load, block position, and operational parameters. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, set up the mast, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full load testing, function testing, and pressure testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This desert-rated workover rig is specifically engineered for:
- Arabian Peninsula deserts: High-temperature desert conditions with enhanced cooling systems
- North African Sahara: Dust-protected components and air filtration for sandy environments
- Central Asian sand deserts: Sealed electrical systems and heat-resistant materials for extreme climates
- Remote desert locations: Self-contained design for areas with limited infrastructure support
Desert workover rig — built for 55°C heat and sand, not painted for it
The Desert Workover Rig (450–750 kN hook load) is engineered for the Middle East, North Africa, and Central Asian desert fields: 55°C-rated cooling, sand-filter air intake, dust-sealed electrical cabinets, and an off-road heavy chassis. On workover jobs that run 24/7 in open desert, standard equipment derates, clogs, and fails within a season.
Choose this rig when:
- Ambient temperatures exceed 45°C for months. Standard cooling is sized for 35–40°C. At 50°C+, engines derate and hydraulics overheat. The 55°C cooling package holds full output through the hottest months.
- Sand and dust are constant. Workover rigs sit on location for weeks at a time, exposed to blowing sand. The sand-filter intake extends engine air filter life from ~200 to ~1,000 hours, and dust-sealed electrical cabinets prevent the short-circuit failures common in desert fields.
- You move between scattered wells across open desert. The off-road heavy chassis handles soft sand between well pads. If your wells are on paved roads, a standard chassis is cheaper.
- Hook load 450–750 kN covers your workover strings. Match to your deepest tubing and packer pull. Above 750 kN, you need a bigger rig class.
Desert rig vs standard workover rig — when is standard enough?
- Standard rig: Fine below 40°C with manageable dust and paved roads. Lower cost, but will not survive a full desert season.
- Desert rig (this unit): 55°C cooling, sand filtration, dust-sealed electrical, off-road chassis. The reliability payback usually shows within the first summer of operation.
Operating sequence
The workover operation follows these key steps:
- Rig positioning and rig-up: Workover rig positioned at wellhead, mast raised and secured, BOP stack connected
- Pre-job checks: Operator verifies drawworks, brakes, mast structure, and control system calibration
- Tubing tripping: Drawworks runs in and pulls out tubing or rod string from the wellbore
- Well intervention: Perform well servicing operations such as pump changes, plug setting, or well cleanup
- Rig down and move: After job completion, rig is rigged down and moved to next location
Common selections
- Sand precleaners: customized configuration tailored to your field conditions
- desert radiators: customized configuration tailored to your field conditions
- water recycling system.: customized configuration tailored to your field conditions
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time monitoring and data logging
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete workover spread?
A: Yes. We can supply workover rigs, flushing units, snubbing units, and auxiliary equipment as a complete package.
Q: Can you customize workover rigs for your site conditions?
A: Yes. We customize workover rigs for ambient temperature, terrain, power supply, and emission regulations. Whether you need desert, cold-weather, or offshore configurations, send your site conditions and we will return a tailored unit configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has been building workover rigs since the 1980s, with hook loads from 350 kN to 1500 kN for well servicing and completion operations. Our workover rigs are available in mechanical, hydraulic, and fully electric configurations, customized for desert, arctic, offshore, and urban-fringe environments. We deliver factory-direct equipment to operators in over 30 countries.
Ready to discuss this model?
Send your well program, target depth, hook load requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.