Internal Guyline Workover Rig
Internal guyline workover rig, guy wires inside mast footprint, minimal well site space required. Designed for professional oilfield service companies and operators who need reliable, field-proven workover equipment that performs consistently under continuous duty.
SJ Petroleum Machinery manufactures this high-pressure workover rig to API standards, with full factory testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Power: Diesel mechanical
The diesel engine and drivetrain are rated for continuous workover rig duty. Critical components (Cummins engine, control system) are sourced from reputable manufacturers with global service support.
Hook load: 600 kN
Hoisting system is designed for heavy-duty workover service with modular components. Field maintenance is straightforward; a trained crew can service the unit in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for hook load, block position, and operational parameters. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, set up the mast, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full load testing, function testing, and pressure testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This internal guyline workover rig is designed for:
- Restricted well sites: Internal guyline system requires less external space than conventional rigs
- Mountain terrain: Compact design for hilly and mountainous well locations with limited access
- Offshore platforms: Space-efficient design for offshore platform workover operations
- Urban areas: Minimal footprint for well sites in urban and industrial areas
Internal guyline — guy strength without the guy footprint
The Internal Guyline Workover Rig (600 kN hook load) keeps the stability of a guyed mast but runs the guy wires inside the mast footprint — anchored to the substructure rather than to the ground around the rig. This gives the compact footprint of a free-standing rig with the higher load capacity of a guyed mast, and it is built for compact road transport.
Choose this rig when:
- Well site space is limited but you need more than free-standing capacity. Free-standing masts cap out at lower hook loads; a guyed mast holds more — but conventional guys need ground area. The internal guyline gets the higher capacity while keeping everything inside the rig footprint.
- You want the load margin of a guyed mast on a tight pad. At 600 kN it covers mid-range workover strings. On pads where external guy anchors would interfere with adjacent wells, roads, or equipment, the internal design removes the conflict.
- Compact road transport matters. With the guy system integrated into the mast/substructure, the rig breaks down into a tighter package for transport — a real advantage on narrow roads and permits with dimension limits.
- Setup speed matters. No ground anchors to drive, no guy wires to tension against external stakes. Rig-up is faster than a conventional guyed rig and needs less crew.
Internal guyline vs free-standing vs external guyed — which mast system?
- External guyed: Highest capacity per cost, but needs open ground for anchors. Best for open-field sites.
- Free-standing: No guys at all, but lower capacity. Best for very tight urban/platform sites.
- Internal guyline (this rig): Guyed-level capacity inside the mast footprint. The middle path for constrained sites that still need 600 kN.
Operating sequence
The workover operation follows these key steps:
- Rig positioning and rig-up: Workover rig positioned at wellhead, mast raised and secured, BOP stack connected
- Pre-job checks: Operator verifies drawworks, brakes, mast structure, and control system calibration
- Tubing tripping: Drawworks runs in and pulls out tubing or rod string from the wellbore
- Well intervention: Perform well servicing operations such as pump changes, plug setting, or well cleanup
- Rig down and move: After job completion, rig is rigged down and moved to next location
Common selections
- Cold weather package: engine heaters, heated cabin for -30°C operation
- Desert package: sand-fill radiators, dust-sealed electrical systems
- Environment-specific configuration: customized for your field conditions
- Winterized or tropical options: available based on your location
- Factory-tested climate package: tested under extreme temperature conditions
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete workover spread?
A: Yes. We can supply workover rigs, flushing units, snubbing units, and auxiliary equipment as a complete package.
Q: Can you customize workover rigs for your site conditions?
A: Yes. We customize workover rigs for ambient temperature, terrain, power supply, and emission regulations. Whether you need desert, cold-weather, or offshore configurations, send your site conditions and we will return a tailored unit configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has been building workover rigs since the 1980s, with hook loads from 350 kN to 1500 kN for well servicing and completion operations. Our workover rigs are available in mechanical, hydraulic, and fully electric configurations, customized for desert, arctic, offshore, and urban-fringe environments. We deliver factory-direct equipment to operators in over 30 countries.
Ready to discuss this model?
Send your well program, target depth, hook load requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.