SGJ600-30T Trailer-Mounted Cementing Unit
Trailer-mounted cementing unit, skid chassis towable, faster rig move. This 600 hp cementing unit (30 MPa working pressure) is designed for professional oilfield service companies who need reliable, field-proven cementing equipment that performs consistently under continuous well cementing duty.
SJ Petroleum Machinery manufactures this 30 MPa cementing unit to API 6A standards, with full factory pressure and flow testing before shipment. We provide on-site commissioning, operator training, and global spare parts support tailored to this model.
Key features
Power: 600 hp
The 600 hp diesel engine and drivetrain are rated for continuous cementing pump duty. Critical components (Cummins engine, Siemens control system) are sourced from reputable manufacturers with global service support.
Working pressure: 30 MPa (4,350 psi)
Fluid end is designed for high-pressure service with modular valve seats and quick-change components. Field maintenance is straightforward; a trained crew can service the pump in hours, not days.
Operator cabin with data logging
Stand-alone air-conditioned operator cabin with pressure gauges, engine controls, and a data recorder for treating pressure, rate, and density. Operators work safely away from high-pressure lines.
Road-legal, single-unit transport
The entire unit is mounted on a standard truck or skid chassis. No disassembly needed for road transport. Drive or tow it to the well location, connect hoses, and start work.
Factory-tested before shipment
Every unit is API-certified (API 7K / API 6A as applicable) and manufactured under our ISO 9001 quality system. Full pressure testing, load testing, and function testing are conducted before leaving the factory. We provide test reports and certification documents with each shipment.
Global spare parts network
We supply spare parts kits, field service engineers, and operator training. Critical spare parts are stocked in our warehouse and shipped within 48 hours of order.
Where this unit fits
This 600 hp, 30 MPa trailer-mounted cementing unit for sale is ideal for:
- Deep well cementing: 30 MPa pressure rating handles intermediate and production casing for wells up to 5000m
- Cluster well pads: Trailer design easily relocates between wells on multi-well pads
- Long-distance moves: Towable configuration for inter-field and cross-country transport
- Heavy-duty operations: High-capacity design for high-volume cementing programs in mature fields
Is SGJ600-30T Trailer Mounted Unit the right choice?
The SGJ600-30T is a trailer-mounted cementing unit — it sits on a multi-axle trailer instead of a truck chassis. This puts it between the truck-mounted SGJ600-30 (high mobility) and the skid-mounted SGJ600-30D (stationary). You get a larger mixing tank and pump deck than a truck, but you still need a tractor to move it between locations.
Choose this model when:
- You need larger mixing capacity than a truck can provide. The trailer frame supports a 2.0 m³ mixing tank (vs 1.5 m³ on the truck) plus a 1.0 m³ buffer tank. This matters for 25–40 m³ cement stages where stopping to refill the mixing tank would extend job time.
- You move between locations, but not every day. You hitch it to a tractor and drive it to the next wellsite — but unlike a truck-mounted unit, you do not have a dedicated cab and chassis. The tractor can be shared with other equipment. Typical use: 1–2 moves per week, not daily rig-to-rig work.
- Well depth is 2,000–3,500 m. Same 30 MPa fluid end as the SGJ600-30, so same depth range. The difference is capacity and deck layout, not pressure rating.
- Road regulations allow heavy trailer loads. The fully loaded unit weighs ~18–22 tons on 3 axles. You need permits on some roads, and the trailer is wider than a truck — check local oversize regulations before ordering.
SGJ600-30T (trailer) vs SGJ600-30 (truck) vs SGJ600-30D (skid) — which to choose?
- Choose the truck (SGJ600-30): Daily moves between wells, small mixing tank is enough, you want a dedicated operator cab.
- Choose the trailer (SGJ600-30T, this model): 1–2 moves per week, larger mixing capacity matters, you can share a tractor with other equipment.
- Choose the skid (SGJ600-30D): Long-term stationary wellsite, you have grid power, mobility is not a concern at all.
Operating sequence
The cementing operation follows these key steps:
- Site positioning: Truck or skid unit positioned at wellhead, suction and discharge lines connected
- Pre-job checks: Operator verifies fluid end condition, safety valves, and control system calibration
- Mix preparation: Mixing system prepares cement slurry to target density and specifications
- Pumping stage: Pump delivers slurry at controlled rate and pressure, operator monitors real-time data
- Displacement: After cement slurry, displacement fluid pushes cement to target depth
Common selections
- Electric drive conversion: VFD electric motor drive for reduced fuel consumption and emissions
- Cold weather package: engine heaters, heated cabin, anti-freeze systems for -30°C operation
- Automated control system: PLC-based control with touchscreen HMI
- Data acquisition and recording: real-time pressure, rate, and force monitoring
- Remote diagnostic capability: remote troubleshooting and software updates
Buyer questions
Q: What is the lead time for a new unit?
A: 6–8 months for a new unit, depending on option list. Refurbished units available in 60–90 days.
Q: Do you supply the complete cementing spread for oil well cementing?
A: Yes. We can supply complete cementing spreads for oil well cementing operations: cementing trucks, batch mixers, cement tanks, and additive systems as a package, engineered to work together for onshore and offshore oilfield projects.
Q: Can you customize cementing units for deep well and high-pressure operations?
A: Yes. We customize cementing units for ambient temperature, terrain, power supply, and emission regulations. Whether you need desert, cold-weather, or offshore configurations, send your site conditions and we will return a tailored cementing truck configuration.
Q: What is the typical price range for this equipment?
A: Pricing depends on capacity, configuration, and option list. Contact our sales team with your requirements for a detailed quote. We offer factory-direct pricing with no middleman markup.
Q: Do you provide on-site commissioning and operator training?
A: Yes. We provide on-site installation supervision, commissioning, and operator training as part of every package. Our service engineers travel worldwide to support your team during startup and operation.
Manufacturing background
SJ Petroleum Machinery has been manufacturing cementing equipment since the 1980s, with over 500 cementing units delivered to oilfield operators in the Middle East, Central Asia, Africa, and Southeast Asia. Our cementing trucks and skids are API-certified and customized for well depths ranging from shallow to ultra-deep wells. We provide factory-direct pricing, global after-sales support, and on-site commissioning for your cementing operations.
Ready to discuss this model?
Send your well program, target pressure, flow rate requirement, and site conditions. We will return a tailored configuration and pricing within 48 hours.